The floor before
The floor before
Diamond grinding
A defective area
Scratch trowel application of our clear primer
The finished industrial floor coating
The finished industrial floor coating
The finished industrial floor coating
The finished industrial floor coating
710 sq m old resin floor littered with footprints and holes from fixings that were removed when the building was vacated. There was an area of 70 sq m covered in tile bedding. The surface was generally heavily scratched and grubby.
The installation was completed in four days.
SSTT the Britdura 750 High-build solvent free Epoxy Coating in Slate Grey. Having seen and been impressed by an installation of ours they invited us to tender for the phased refurbishment of their new facility.
SSTT are expanding their operation in Sutton Oxfordshire. They required a cost effective approach to reinvigorating the floor at their new address without having to go to the expense of removing the old 2mm resin floor.
The Britdura 750 offered them the correct balance between cost, performance and appearance.
The Slate Grey coating lends a new lease of life to the existing resin floor without the expense and waste implication of removing the old resin floor.
Dust controlled diamond grinding was used to clean the surface and to reduce edges. The surface was vacuum cleaned. The tile bedding was removed using the same process to expose the concrete.
The floor was heavily gouged, worn and littered with bolt holes and foot prints. Loose areas were removed and a number of holes filled.
SSTT are expanding their operation in Sutton Oxfordshire. They required a cost effective approach to reinvigorating the floor at their new address without having to go to the expense of removing the old 2mm resin floor.
The Britdura 750 offered them the correct balance between cost, performance and appearance.
