The concrete before
Repairs
Cracks in the concrete
Shot-blasting underway
The industrial smoothing screed
The fine slip resistant finish
The finished floor
The finished floor
Slate Grey and French Blue
The finished industrial floor layout
Facts & Figures
- Completion date: September / October 2015
- Location: Sandwich, Kent
- Size of floor: 1000 sq m
- Total thickness: Approximately 8 mm
- Finish: Built in very fine slip resistant finish.
- Colour / Layout: Slate Grey throughout with French Blue and Cherry Red to highlight Goods In / Out and a Fire Lane respectively.
- Existing floors: The concrete was undulating and pitted with exposed aggregate throughout. There were numerous holes to fill.
1000 sq m renovated in 10 Days.
The concrete was undulating and pitted with exposed aggregate throughout. There were numerous holes to fill.
The preparation and installation were project managed entirely by Elgood.
Parkserve Required an even wearing floor to meet the needs of their incoming tenant.
A floor that can be cleaned routinely with a scrubber dryer.
Breakers were used to remove patches of latex screed with vacuum contained shot-blasting and diamond grinding to prepare the concrete.
We specified a High Strength Industrial Smoothing Screed laid to an average thickness of approx 7 mm to resurface the floor finished with our Britdura 750 High-build Solvent Free Epoxy Floor Coating in Slate Grey.
Preparation for Industrial Flooring
Breakers to remove patches of latex screed.
Vacuum contained shot-blasting and diamond grinding to prepare the concrete.
Industrial Flooring system
High Strength Industrial Smoothing Screed laid to an average thickness of approx 7 mm to resurface the floor.
Our Britdura 750 High-build Solvent Free Epoxy Floor Coating in Slate Grey.
