Slip Resistant Industrial Flooring at Honeywell Cheshire

Shot-blasting underway

The old floor

A defective area

Shot-blasting

The G20 Coarse Finish

The finished industrial floor coating with coarse slip resistant texture

The finished industrial floor coating with coarse slip resistant texture

The finished industrial floor coating with coarse slip resistant texture

The finished industrial floor coating with coarse slip resistant texture

Previous Next

265 sq m completed in three days over a Bank Holiday.

Following the success of an area installed in 2006 Elgood Industrial Flooring’s 1000 Solvent Free Highbuild Epoxy Floor Coating with Medium Grade Slip Resistant finish was chosen again for the Goods In/Out areas in our colour Charcoal.

Thickness approximately 2mm.

Honeywell required a hard wearing slip resistant finish for their Forklift Trucks.

Dust free shotblasting was used to remove the existing paint and to clean and provide a good physical key on the concrete.

The screed was gouged, worn and had been damaged in places. These patches were cut back to a sound edge, prepared and filled to provide an even wearing floor.

Installation Programme: The installation was completed in three days over a Bank Holiday.

The Elgood Service: The Elgood Service: manufactured, prepared and installed entirely by Elgood Industrial Flooring.

George Maher Honeywell

Thanks for the non slip flooring you have just completed. The floor looks great and very professional. I was also pleasantly surprised by the cleanliness of the place. I was expecting a major clean up of dust following the work, this was not the case.