The floor before
The during shot-blasting
The finished floor
The finished floor
The finished floor
The finished floor
Facts & Figures
- Completion date: October 2014
- Location: High Wycombe
- Size of floor: 2,000 sq m.
- Colour: Slate Grey
- Finish: Built in fine slip resistant finish ideal for use with scrubber dryer machines.
- Total thickness: Floor thickness of approximately 750 microns applied by scratch trowel and roller to achieve an even distribution of the coating and consistent appearance.
- Manufactured by: Elgood Industrial Flooring Ltd
- Existing Floors: A concrete floor which had been prepared by shot-blasting in the past and had received a coating. The surface was worn and soiled.
The 2000 square metre painted concrete formed part of the facilities upgrade. Martin Audio asked for a hard wearing coating which is suitable for Forklift use and will retain a good standard of appearance.
The installation was completed in three phases, each with a duration of three days.
The new floor was manufactured, prepared and installed entirely by Elgood Industrial Flooring.
Comprehensive 5 Year Workmanship and Materials Guarantee.
Installation Programme: Three phases, each with a duration of three days.
Preparation for Industrial Flooring
The floor was prepared using vacuum contained shot-blasting; its clean and dust free nature makes shot-blasting suitable for use in operational environments.
Remedial work to fill bolt holes, cracks and joints to prevent these from becoming dirt traps and to ease cleaning.
Industrial Flooring system
We laid our Britdura 750 Solvent Free Epoxy Coating in Slate Grey. Being solvent free and virtually odourless, the coating could be installed during normal production hours.
Floor thickness of approximately 750 microns applied by scratch trowel and roller to achieve an even distribution of the coating and consistent appearance.
